Admin
Admin
Posts : 94
Points : 5646
Join date : 2009-12-26
Age : 35
Location : Malaysia
 |  Subject: iATKOS v5i - Mac OSx86 Leopard 10.5.5 Intel DVD Rapidshare Megaupload Free Download Tue Dec 29, 2009 10:37 pm | |
| - Quote :
iATKOS 5i
Mac OSx86 Leopard 10.5.5 for Intel SSE2/SSE3
Built by OSX86.Türk team
- Quote :
- Source : TPB torrent
File Name : iATKOS_5i.iso
MD5 : 7219c67e9d770cab0d9e54dcd275cf4e
ISO Size : 2.63 GB (2,831,122,432 bytes)
RAR Size : 2.22 GB (2,387,489,044 bytes)
- Quote :
- The Readme
Welcome to iATKOS v5i Installation..
The oscar goes to Apple and OSX86 community..
Thanks to Netkas and the chameleon team for the bootloader..
Thanks to fassl, superhai and mackerintel for their dsdt work..
Special thanks to pere and fassl for their supports on this work of mine..
And zapf2000, thank you buddy, for all of your supports  cheers to ggrn.de people..
For my brother eskurza..
uphuck
- Quote :
- Attention:
1- This DVD is designed for Intel architectures.
Minimum requirements: Intel SSE2 CPU, 512MB RAM, 10GB free space on target partition, OpenGL VGA card.
Recommended: Intel Core CPU, 1GB RAM, 15GB free space on target
partition, nVidia 6xxx or newer - ATI X1300 or newer - Intel GMA950 or
X3100 VGA card.
2- This DVD includes Apple's Mac OS X Leopard 10.5.5 (9F33) installation.
3- Make sure that the md5 checksum of your iATKOS iso image matches the
one posted on our website. Otherwise you may have a faulty DVD image.
Use quality media/burner and burn slowly.
- Quote :
- Information:
- This OSX86 installation DVD release supports both GPT and MBR partitioned harddrives.
- The major improvement on this 5i release is updating your running
system using software updater just like real Macs. This is possible for
Intel based chipsets. Please read the information about preparing an
upgradable system below.
- Main system is fully stock! That
means it can't run on x86 hardware without selecting none of x86
patches. At least you need to choose one of the decrypters.
Installation:
1- Run Disk Utility via Utilities menu and erase the target partition for clean install. Do partitioning if you need to.
a- You can choose MBR (Master Boot Record) or GPT (Guid Partition
Table) via partitioning options. If you want to change your existing
partition table type, note that all your existing data on disk will be
gone.
b- For Windows fellows that has not tested this amazing
system yet and that does not want to loose their windows software, porn
and virus&trojan archive on D:\, should use Parted Magic Live CD
for preparing an active primary target partition and after that, just
erase it via diskutil. Jump to Step 2.
2- Select the destination for installation.
3- Click Customize*** and select what you need.
4- Click Install.
Install time is about 20 minutes.
*** Customize section is the most important part of the installation for you to make OS X work on your hardware.
Customize:
- iATKOS Main system: If you want to install the osx86 main system, you need to select this.
- Bootloader:
You have 2 choices. You must select one of them for booting your osx86
system. PC_EFI V9 is an "all in one" bootloader and has many options.
The most important ones are DSDT override, external kexts and the 64bit
mode (snow leo only). DSDT override will be needed for the upcoming
updates, otherwise osx86 systems will have kernel panic due to new RTC
driver. "External kexts" option allows users to use external location
for their special drivers (/Extra/Extensions), this will protect them
from the updates. iATKOS v5i installation has all the needed scripts
and packages for you to prepare an upgradable system and update like
real Macs, but you need to read the information about preparing an
upgradable system below.
The other choice is Chameleon v1.0.11.
This is compatible for most systems, users whom want to have a normal
old-style osx86 system may choose this bootloader.
- Decrypters: You must select one of the decrypters for your x86 hardware.
- SMBIOS:
You need to select one of the enablers or classic x86 SMBIOS drivers.
Enablers allow your system to run on stock SMBIOS driver and this is
also a must for upgradable systems. x86 patched SMBIOS' are for normal
old style osx86 systems.
- Kernel: You can choose 9.5.0 voodoo, 9.5.0 fassl kernel or old 9.2.0 toh kernel which is compatible for most.
For upgradable systems, the custom kernel you selected will be
protected after applying the update, which means you will be running on
new System.kext + your old 9.x.0 custom kernel which is not right.
System must run on System.kext that belongs to your kernel version. So,
you will need to replace new System.kext with your old System.kext,
otherwise you will not able to use none of USB devices. You can find
your custom kernel's System.kext under /Library/Temp. New updated one
is in /System/Library/Extensions folder. Do not forget to repair the
disk permissions using Disk Utility.
If you want to switch to
stock kernel when running upgradable system, then you need to edit
com.apple.Boot.plist file under
/Library/Preferences/SystemConfiguration. You need to change the value
''custom'' to ''mach_kernel'' and reboot. Don't forget to use the same
System.kext version with your running kernel. For normal iATKOS osx86
systems you need to check /Library/Backups folder for the stock kernel
and replace it with the existing kernel on your root.
- ACPI:
Main system includes stock ACPI driver. You can choose modified ACPI
for shutdown/reboot problems and also you can select OHR driver for
such issues. You can choose x86 modified ACPI driver for PS2
mouse/keyboard and also PS2 driver can sure manage that but it is not a
good choice for upgradable systems. You may need to select APIC driver
for some mobo.
- Disabler: This driver disables some
problematic drivers, you may not need this for PC_EFI V9 systems but
this can still be usefull for most systems.
- Remove PowerManagement: This removes the most problematic driver. You do not need it if you select Disabler or if you are on PC_EFI V9 bootloader.
- PS/2:
Driver for PS/2 keyboard/mouse. You will need to modify the Info.plist
of ACPIPS2Nub.kext for the update's ACPI version before applying main
system update, otherwise your ps2 mouse/keboard will not work. For
upgradable systems, I advice you to use x86 ACPI driver instead of
this.
- OHR: Driver for freeze issues on shutdown/reboot. Modified ACPI driver can be an alternative for this.
- Drivers: Additional drivers for your setup. Read the descriptions.
*********Preparing an Upgradable System**********
A profile is given below, first four items are musts for upgradable
systems, the rest are for additional setups. Read carefully. Intel
chipsets have more chance for success.
- Main System
- PC EFI V9 Bootloader
- One of the Decrypters
- One of the SMBIOS Enablers
- It is better to use the stock kernel. If any custom kernel is
selected then you will need to replace the System.kext with the one in
/Library/Temp after applying the update.
- For PS2 mouse/keyboard it is better to select x86 ACPI driver instead of PS2 driver.
- Speedstepping support may be problematic for upgradable systems without Disabler. But you can use it safely with Disabler.
- GMA950-a will fail after update, GMA950-b or efi string should be selected for such systems.
Multiboot:
iATKOS 5i has no integrated procedure for multibooting but preparing a multiboot GPT or MBR system with this release is easy.
Here is a ''How To'' for GPT and MBR triple boot including Mac-Win-Linux.
- MBR (Master Boot Record) triple boot -
-
Change your partition table type to MBR (msdos type) and create 3
primary partitions by using Parted Magic Live CD or iATKOS Disk
Utility. HFS+ format for OS X target, Fat32 for the others.
(Note: %99.99999 of the PC harddrives already have MBR partition map
scheme (msdos type) which you can change it to GPT via Parted Magic CD
or iATKOS Disk Utility if you like to.)
- Add boot flag to Vista or Linux target and install the OS' in any order you like.
For linux, do not install bootloader to MBR, install it to linux root.
If you want linux to take the boot control then you need to install its
bootloader to MBR.
- Boot iATKOS 5i DVD and install OS X to its target as usual.
- You may need to repair Vista. Add boot flag to Vista partition, boot
Vista DVD, select repair, add boot flag to OS X partition, thats all.
Now you have triple boot on MBR.
Note: Adding boot flag to MBR partitions: Boot Parted Magic Live CD, right click to partition, select flags and click to boot.
- GPT (Guid Partition Table) triple boot -
-
Change your partition table type to GPT (Guid Partition Table) and
create 3 partitions by using iATKOS Disk Utility. HFS+ format for OS X
target, Fat32 (msdos) for the others.
- Boot Windows Media and install it to its Fat32 target partition.
(Note: Vista might not detect the hybrid partition table as XP does
If so it will refuse to install the OS on the target. The trick is just
try to format the other partition and then select your real target
again for installation, you will see that it will success this time. No
need to worry, it will not erase any data that time, because it cannot
even detect the MBR part of the hybrid but this trick solves it.)
- Boot Linux media and install the OS.
If you want OS X to take the control of booting then install Linux
bootloader to Linux root. If you want Linux to take the control then
install it to MBR (actually the MBR of msdos part of the hybrid
partition table) and you will need to change the install order also.
The one which will take the boot control should be the last one to be
installed.
(Note: Some live linux cd stuff (knoppix, kanotix,
parsix, etc.) has built-in installer applications and they use gparted
for partitioning and formatting targets. At this point, formatting
target to linux fs via Gparted is not a good choice because it may
break the hybrid partition table, use unix fdisk just for changing the
target partition type from ''c0'' to ''83'' which is linux partition
type, then you can continue installation.)
- Boot iATKOS 5i DVD and install OS X as usual.
Now you have triple boot on GPT, thats all.
Known Issues:
- This dvd may not include all the necessary drivers required by your
setup. Additional steps may be needed to be taken by the user to setup
and use such components.
Unsuccessful Installation and Related Symptoms:
- System freezes at grey screen by booting from DVD.
--> You probably have an unsupported chipset.
*965 or newer chipset ASUS or MSI motherboard/laptop
*many VIA, SIS, ATI chipset motherboards
~ start with cpus=1 -v
~ Play with BIOS settings, turn off 1 core
~ There are modified BIOS' for Intel 965 and newer ASUS/MSI motherboards
*******************************************
For additional Help and instructions, here is the website and irc channel.
Webs
- Quote :
- [You must be registered and logged in to see this link.]
IRC
- Quote :
- irc.atlantis-irc.net #uphuck.DVD #osx86.turk #core.osx86.hu #iATKOS
******************************************
Good luck, if you enjoy your Mac OS X86 Leopard System, buy a real Mac 
Brought to you by OSX86.Türk team
Usefull Links:
- Quote :
[You must be registered and logged in to see this link.]
Some Tips
- Quote :
> Download > Verify the MD5 > Burn to DVD with low speed 2.4x-4x
> Print iATKOS_5i.pdf
> Prepare your PC/Laptop
> Make a cup of coffee > Boot the DVD with option -v
> Install.. enjoy your coffee and keep your fingers crossed
- Quote :
[You must be registered and logged in to see this link.]
- Quote :
- [You must be registered and logged in to see this link.]
| |
|
Home 
Latest images 
Search 
Register 
Log in